Start creating with CodyNick

Install → Connect → Run your first code

Go to Welcome Package

CodyNick Setup Steps

Three simple steps to get your device ready and test your first project.

STEP 1

Install mBlock

Download and install the coding platform for CodyNick.

STEP 2

Connect Device

Plug in your CodyJoy Pro and make sure the connection works.

STEP 3

First Code Test

Run your first Hello World project and light an LED in green.

Step 1 · Install

Install mBlock on your computer

mBlock is the coding environment used to create and upload CodyNick projects.

Download the installer
Run the installation
Open mBlock and get ready for connection

Download mBlock

Step 2 · Connect

Connect your CodyJoy Pro

Connect your device with USB, then check that mBlock can detect it properly.

Select the correct device in mBlock
Check the connection
Use troubleshooting if needed

Connection Test

Check the device connection

Troubleshooting

Fix common issues

Step 3 · First Code Test

Hardware Hello World!

In your first CodyNick project, you will use the joystick to control 4 LEDs, with each direction lighting a different LED in a different color.

Open your first project flow
Use the joystick directions as inputs
Control 4 LEDs with different colors
Upload the program and test each direction

You are ready to start creating

Once these three steps are complete, your CodyNick setup is ready for more projects.

Have an idea? Let’s get your project started today!

See All Projects